ROBBE SZD 54 Manuel D'utilisation page 17

I N S T R U C T I O N S A N D U S E R M A N U A L
2 . A S S E M B L Y O F T H E R U D D E R :
3 . R U D D E R C O N N E C T I O N S :
too tight!
optimal!
Insert the rudder into the recess provided
for this purpose on the fuselage and tighten
it with screw M4x35 from below. Make sure
that you also have a tight fit without dama-
ging the screw connection!
The two clevis heads for the rudder and
elevator must now be mounted in the cor-
responding rudder horn on the 3rd hole and
screwed tight.
Make sure that the screw is only tighten-
ed firmly, that the linkage remains smooth
running!
17