maining battery capacity
dicating the remaining battery capacity
ng the remaining battery capacity
e remaining battery capacity
Indicating the remaining battery capacity
Indicating the remaining battery capacity
Indicating the remaining battery capacity
Indicating the remaining battery capacity
efore
ved before
ly for battery pack with the indicator
battery pack with the indicator
k with the indicator
y pack with the indicator
Only for battery pack with the indicator
Only for battery pack with the indicator
Only for battery pack with the indicator
Only for battery pack with the indicator
11. Indicator lamps 12. Check button
Press the check button on the battery pack to indicate the remaining battery capacity.
Those 4 LED might show the status of the capacity level of the battery:
ding on the conditions of use and the ambient temperature, the indication may differ
n the conditions of use and the ambient temperature, the indication may differ
TE: Depending on the conditions of use and the ambient temperature, the indication may differ
epending on the conditions of use and the ambient temperature, the indication may differ
NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ
NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ
NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ
NOTE: Depending on the conditions of use and the ambient temperature, the indication may di
e actual capacity.
al capacity.
om the actual capacity.
htly from the actual capacity.
slightly from the actual capacity.
slightly from the actual capacity.
slightly from the actual capacity.
slightly from the actual capacity.
g indication
cation
arging indication
.
Charging indication
Charging indication
Charging indication
Charging indication
13. Charger
ttery pack.
ack.
Connect the charger to the power outlet socket
nd result in
ult in
Solid green: ready to charge
Solid red: charging
Solid green: charged
Solid green and red: battery or charger damaged
does not fit properly, disconnect it and confirm that the battery pack is the
te: If the battery does not fit properly, disconnect it and confirm that the battery pack is the
he battery does not fit properly, disconnect it and confirm that the battery pack is the
ttery does not fit properly, disconnect it and confirm that the battery pack is the
Note: If the battery does not fit properly, disconnect it and confirm that the battery pack is the
Note: If the battery does not fit properly, disconnect it and confirm that the battery pack is the
Note: If the battery does not fit properly, disconnect it and confirm that the battery pack is the
Note: If the battery does not fit properly, disconnect it and confirm that the battery pack is
model for this charger as shown on the specification chart. Do not charge any other
his charger as shown on the specification chart. Do not charge any other
rect model for this charger as shown on the specification chart. Do not charge any other
for this charger as shown on the specification chart. Do not charge any other
correct model for this charger as shown on the specification chart. Do not charge any other
correct model for this charger as shown on the specification chart. Do not charge any other
correct model for this charger as shown on the specification chart. Do not charge any other
correct model for this charger as shown on the specification chart. Do not charge any ot
tery pack or any battery pack that does not securely fit the charger.
r any battery pack that does not securely fit the charger.
battery pack that does not securely fit the charger.
ack or any battery pack that does not securely fit the charger.
battery pack or any battery pack that does not securely fit the charger.
battery pack or any battery pack that does not securely fit the charger.
battery pack or any battery pack that does not securely fit the charger.
battery pack or any battery pack that does not securely fit the charger.
Frequently monitor the charger and battery pack while connected
1.
1.
1.
1.
Unplug the charger and disconnect it from the battery pack when finished.
2.
2.
2.
2.
Allow the battery pack to cool completely before using it.
3.
3.
3.
3.
Store the charger and battery pack indoors, out of reach of children.
4.
4.
4.
4.
hot after continuous use in the tool, allow it to cool down to room tempera-
ry is hot after continuous use in the tool, allow it to cool down to room tempera-
TE: If battery is hot after continuous use in the tool, allow it to cool down to room tempera-
battery is hot after continuous use in the tool, allow it to cool down to room tempera-
NOTE: If battery is hot after continuous use in the tool, allow it to cool down to room tempera-
NOTE: If battery is hot after continuous use in the tool, allow it to cool down to room tempera-
NOTE: If battery is hot after continuous use in the tool, allow it to cool down to room tempera-
NOTE: If battery is hot after continuous use in the tool, allow it to cool down to room tempe
ore charging. This will extend the life of your batteries.
g. This will extend the life of your batteries.
e before charging. This will extend the life of your batteries.
arging. This will extend the life of your batteries.
ture before charging. This will extend the life of your batteries.
ture before charging. This will extend the life of your batteries.
ture before charging. This will extend the life of your batteries.
ture before charging. This will extend the life of your batteries.
e battery pack from charger stand which use your thumb or fingers, press the
TE: Remove battery pack from charger stand which use your thumb or fingers, press the
emove battery pack from charger stand which use your thumb or fingers, press the
ery pack from charger stand which use your thumb or fingers, press the
NOTE: Remove battery pack from charger stand which use your thumb or fingers, press the
NOTE: Remove battery pack from charger stand which use your thumb or fingers, press the
NOTE: Remove battery pack from charger stand which use your thumb or fingers, press the
NOTE: Remove battery pack from charger stand which use your thumb or fingers, press
tery's release button in and pull the battery pack off at the same time.
tton in and pull the battery pack off at the same time.
se button in and pull the battery pack off at the same time.
release button in and pull the battery pack off at the same time.
battery's release button in and pull the battery pack off at the same time.
battery's release button in and pull the battery pack off at the same time.
battery's release button in and pull the battery pack off at the same time.
battery's release button in and pull the battery pack off at the same time.
Indicating the remaining battery capacity
Only for battery pack with the indicator
NOTE: Depending on the conditions of use and the ambient temperature, the indication m
slightly from the actual capacity.
Charging indication
Note: If the battery does not fit properly, disconnect it and confirm that the battery pa
correct model for this charger as shown on the specification chart. Do not charge a
battery pack or any battery pack that does not securely fit the charger.
1.
2.
3.
4.
NOTE: If battery is hot after continuous use in the tool, allow it to cool down to room
ture before charging. This will extend the life of your batteries.
NOTE: Remove battery pack from charger stand which use your thumb or fingers, p
battery's release button in and pull the battery pack off at the same time.
Indicator Lamps
- 06 -
Switch action
Switch action
Switch ac
Remaining
capacity
Reversing switch a
Reversing sw
Reversin
75-100%
50-75%
25-50%
0-25%
This tool has a reversin
This tool has a re
This tool h
13
from the A side for cloc
from the A side f
from the A
When the reversing sw
When the revers
When the
Lighting up the front
Lighting up the
Lighting u
Speed change
Speed change
Speed ch
Swit
Rev
This
from
Whe
Ligh
Spe