Publicité
Les langues disponibles
Les langues disponibles
ery short can cause a large current flow, overheating, possible burns and even a breakdown.
A battery short can cause a large current flow, overheating, possible burns and even a breakdown.
A battery short can cause a large current flow, overheating, possible burns and even a breakdown.
A battery short can cause a large current flow, overheating, possible burns and even a breakdown.
Do not store the tool and battery pack in locations where the temperature may reach or exceed 50
store the tool and battery pack in locations where the temperature may reach or exceed 50
6.
Do not store the tool and battery pack in locations where the temperature may reach or exceed 50
6.
Do not store the tool and battery pack in locations where the temperature may reach or exceed 50
6.
6.
°C (122 °F).
2 °F).
°C (122 °F).
°C (122 °F).
Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The
t incinerate the battery pack even if it is severely damaged or is completely worn out. The
7.
Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The
7.
Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The
7.
7.
y pack can explode in a fire.
battery pack can explode in a fire.
battery pack can explode in a fire.
battery pack can explode in a fire.
Be careful not to drop or strike battery.
eful not to drop or strike battery.
8.
Be careful not to drop or strike battery.
8.
Be careful not to drop or strike battery.
8.
8.
Do not use a damaged battery.
use a damaged battery.
9.
Do not use a damaged battery.
9.
Do not use a damaged battery.
9.
9.
ontained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
10.
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
10.
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
10.
10.
For commercial transports e.g. by third parties, forwarding agents, special requirement on packag-
mmercial transports e.g. by third parties, forwarding agents, special requirement on packag-
For commercial transports e.g. by third parties, forwarding agents, special requirement on packag-
For commercial transports e.g. by third parties, forwarding agents, special requirement on packag-
d labeling must be observed.
ng and labeling must be observed.
ing and labeling must be observed.
ing and labeling must be observed.
For preparation of the item being shipped, consulting an expert for hazardous material is required.
eparation of the item being shipped, consulting an expert for hazardous material is required.
For preparation of the item being shipped, consulting an expert for hazardous material is required.
For preparation of the item being shipped, consulting an expert for hazardous material is required.
e also observe possibly more detailed national regulations.
Please also observe possibly more detailed national regulations.
Please also observe possibly more detailed national regulations.
Please also observe possibly more detailed national regulations.
or mask off open contacts and pack up the battery in such a manner that it cannot move
Tape or mask off open contacts and pack up the battery in such a manner that it cannot move
Tape or mask off open contacts and pack up the battery in such a manner that it cannot move
Tape or mask off open contacts and pack up the battery in such a manner that it cannot move
d in the packaging.
around in the packaging.
around in the packaging.
around in the packaging.
w your local regulations relating to disposal of battery.
Follow your local regulations relating to disposal of battery.
11.
Follow your local regulations relating to disposal of battery.
11.
Follow your local regulations relating to disposal of battery.
11.
11.
NICAL DETAILS
CHNICAL DETAILS
TECHNICAL DETAILS
TECHNICAL DETAILS
TECHNICAL DETAILS
TECHNICAL DETAILS
Drilling capacities
ed use) replace st
ace st
epeated use) replace st
) replace st
afety rules
ules
ollow the safety rules
the safety rules
Fastening capacities
No load speed (RPM)
Overall length
Rated voltage
6.
6.
6.
7.
7.
7.
8.
8.
8.
9.
9.
9.
10.
10.
10.
11.
11.
11.
TECHNICAL DETAILS
TECHNICAL DETAILS
TECHNICAL DETAILS
Steel
Wood
Wood screw
Machine screw
High (2)
Low (1)
10 mm (3/8")
30 mm (1-3/16")
6 mm x 75 mm (1/4" x 2-15/16")
M6 (1/4")
0 - 1,650 /min
0 - 400 /min
162 mm (6-3/8")
D.C. 18 V
- 04 -
FUNCTI
FUN
CAU
adjusting o
adju
DESCRIP
DES
Installing
Inst
CAUT
CAU
Failure to
Failu
damage to
dam
Publicité
