Publicité
Les langues disponibles
Les langues disponibles
d, switch off the tool first. Push the speed change lever to display "2" for high
change the speed, switch off the tool first. Push the speed change lever to display "2" for high
ch off the tool first. Push the speed change lever to display "2" for high
e the speed, switch off the tool first. Push the speed change lever to display "2" for high
speed, switch off the tool first. Push the speed change lever to display "2" for high
the tool first. Push the speed change lever to display "2" for high
To change the speed, switch off the tool first. Push the speed change lever to display "2" for high
To change the speed, switch off the tool first. Push the speed change lever to display "2" for high
To change the speed, switch off the tool first. Push the speed change lever to display "2" for high
speed but high torque. Be sure that the speed change lever is set to the correct
r low speed but high torque. Be sure that the speed change lever is set to the correct
gh torque. Be sure that the speed change lever is set to the correct
"1" for low speed but high torque. Be sure that the speed change lever is set to the correct
but high torque. Be sure that the speed change lever is set to the correct
ed or "1" for low speed but high torque. Be sure that the speed change lever is set to the correct
speed or "1" for low speed but high torque. Be sure that the speed change lever is set to the correct
speed or "1" for low speed but high torque. Be sure that the speed change lever is set to the correct
speed or "1" for low speed but high torque. Be sure that the speed change lever is set to the correct
before operation.
tion.
operation.
ition before operation.
position before operation.
position before operation.
position before operation.
he tool speed is coming down extremely during the operation with display "2", push the lever to
oming down extremely during the operation with display "2", push the lever to
d is coming down extremely during the operation with display "2", push the lever to
down extremely during the operation with display "2", push the lever to
speed is coming down extremely during the operation with display "2", push the lever to
extremely during the operation with display "2", push the lever to
If the tool speed is coming down extremely during the operation with display "2", push the lever to
If the tool speed is coming down extremely during the operation with display "2", push the lever to
If the tool speed is coming down extremely during the operation with display "2", push the lever to
1" and restart the operation.
operation.
play "1" and restart the operation.
t the operation.
restart the operation.
on.
display "1" and restart the operation.
display "1" and restart the operation.
display "1" and restart the operation.
Maintenance
ng / Maintenance
nce
eaning / Maintenance
tenance
Cleaning / Maintenance
Cleaning / Maintenance
Cleaning / Maintenance
Remove the battery pack from the device before carrying out any work or transporting it. If the
device is switched on accidentally, there is a danger of injury.
Always wear protective gloves when handling the saw blade 1 be done regularly. This will
ensure a long and reliable service life.
eaning
g
Cleaning
Cleaning
Cleaning
Do not spray the appliance with water and do not immerse it in water. Electric shock hazard!
Keep clean the ventilation slots, motor housing and handles of the appliance.
Use a damp cloth or a brush. Do not use cleaning agents or solvents. You may otherwise irrepara-
bly damage the appliance.
s with part 15 of the FCC rules. Operation is subject to the following two
s device complies with part 15 of the FCC rules. Operation is subject to the following two
15 of the FCC rules. Operation is subject to the following two
mplies with part 15 of the FCC rules. Operation is subject to the following two
ce complies with part 15 of the FCC rules. Operation is subject to the following two
part 15 of the FCC rules. Operation is subject to the following two
This device complies with part 15 of the FCC rules. Operation is subject to the following two
This device complies with part 15 of the FCC rules. Operation is subject to the following two
This device complies with part 15 of the FCC rules. Operation is subject to the following two
s:
ditions:
conditions:
conditions:
conditions:
not cause harmful interference, and (2) this device must accept any interference
use harmful interference, and (2) this device must accept any interference
This device may not cause harmful interference, and (2) this device must accept any interference
may not cause harmful interference, and (2) this device must accept any interference
rmful interference, and (2) this device must accept any interference
evice may not cause harmful interference, and (2) this device must accept any interference
(1) This device may not cause harmful interference, and (2) this device must accept any interference
(1) This device may not cause harmful interference, and (2) this device must accept any interference
(1) This device may not cause harmful interference, and (2) this device must accept any interference
ding interference that may cause undesired operation.
ence that may cause undesired operation.
hat may cause undesired operation.
eived, including interference that may cause undesired operation.
terference that may cause undesired operation.
including interference that may cause undesired operation.
received, including interference that may cause undesired operation.
received, including interference that may cause undesired operation.
received, including interference that may cause undesired operation.
- 08 -
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshoo
Protecting the environme
Protecting the enviro
Protecting the en
Protecting th
Batteries
Batteries
Batteries
Batteries
Trouble
Tro
Protecti
Pro
Batteries
Batt
Publicité
