Faber GALILEO BK GLASS NG A830 Manuel D'utilisation page 9

ON/OFF of the hob/hood
Press ON. Press again to turn OFF.
Select the Cooking zone to set indipendent timer.
It is a countdown, which can be set for each cooking zone, even simultaneously.
At the end of the set period the cooking zones will automatically shut down and
an acoustic signal informs of it.
Activation/Regulation of the hob timer:
Press more time the key to chose the cooking zone you want to activate.
The relative icon on the cooking zone will be lighted on.
When the desired cooking zone is selected, regulate the duration of the timer:
Press the + to increase the automatic shutdown time
Press - to decrease the automatic shutdown time
Setting the time (plus /minus)
Stop&Go / Recall
This function allows to suspend / restart any function active on the hob, bringing
the cooking power to zero. Press to activate, press again and slide completely
the indicated slider from left to right to deactivate.
Note: If after 10 minutes, the Pause function is not deactivated, the hob will turn
off automatically.
This function allows to recover all the hob settings, in case of accidental shutdown.
Activation:
- Turn the hob back on
- Press within 6 seconds
Locking/unlocking the hob
+
Allows to block the settings of the hob to prevent accidental tampering, leaving the
functions that have already been set active. Repeat the operation to deactivate.
Cooking zone position indicator
The cooking zones are able to work in combination, creating a single zone with the
same power level. Front master and back secondary cooking zones. To activate
the Bridge function: touch simultaneously the 2 bar and the symbol lights up.
With the selection bar of the master zone it is possible to select the power level.
To deactivate the bridge function simply repeat the same activation procedure
Cooking zone selection
Increase/Decrease power level
Supplementary power feature which remains active for 10 minutes, after which
the temperature returns to the previously set value.
Touch and scroll along the Selection bar and activate the Power Booster.
The power booster level is shown on the display of the selected zone with the
symbol "P".
Temperature Manager activation. The display shows .
Cooking / Keep warming at 42°C
Cooking / Keep warming at 74°C
Cooking / Keep warming at 92°C
Bridge zone between two cooking zones activated
Power Booster activated
9