SPM IPro 1 Slusher ECO Notice D'utilisation Et D'entretien page 36

"SYSTEM OVER TEMPERATURE" alarm
A system over temperature message CUT/OUT
will appear (fig.11) as a safety precaution when
the unit has overheated to protect the
compressor.
•
The system automatically goes to "OFF"
status where the compressor's operations is
stopped, while augers will keep working to
avoid forming ice blocks.
•
When this occurs a CUT/OUT message will
appear on capacitive display to alert the
operator of this condition (fig.11).
•
When this alarm activates, turn off all
switches. Then determine the condition and
the necessary corrective action.
Edition: June, 2013
All manuals and user guides at all-guides.com
Revision: 7
Fig. 11
Pag. : 36/76