SPM IPro 1 Slusher ECO Notice D'utilisation Et D'entretien page 32

9. ELECTRONIC CONTROL BOARD
Manual mode
After connecting the unit plug with the
electricity main, the unit is ready to be switched
on. The control panel appears like the one in
figure 8.
Touching the ON/OFF symbol with a finger on
the capacitive display, it will be completely
switched on and it will appear such us the one in
figure 9; the unit is now ready to work in
manual mode.
On the capacitive display you will find the
following buttons:
ON/OFF: it turns on and off the unit.
LIGHT: it switches on and off the LED lights on
the bowl cover if pressed once, it locks all the
panel's buttons if kept pressed for 5 seconds.
AM/PM: if the 12 hours mode is activated, this
two symbols indicates if it is morning or
afternoon.
DAY: indicates the day of the week.
LEFT-CENTER-RIGHT: these three buttons start
rotating the correspondent auger.
FREEZE: this button activates the freezing
mode.
CHILL: this button activates the chilling mode.
AUTO: if this button is switched on, the unit
starts working in automatic mode following the
set parameters.
Edition: June, 2013
All manuals and user guides at all-guides.com
The FREEZE, CHILL and the AUTO buttons,
three augers is rotating; obviously this will
Revision: 7
Fig. 8
Fig. 9
!CAUTION!
could be switched on only if one of the
activate only the correspondent
refrigerating.
Pag. : 32/76