Napoleon Acies Serie Manuel D'installation page 35

6.1 hard wiring connection
It is necessary to hard wire this appliance.
Permanently framing the appliance with an enclosure, requires the appliance junction box to be hard wired. This
appliance must be electrically connected and grounded in accordance with local codes. In the absence of local
codes, use the current CSA C22.1 Canadian Electrical Code in Canada or the ANSI/NFPA 70-1996 National
Electrical Code in the United States.
6.2 receptacle wiring diagram
Route power supply and optional LHAD (Linear Hot Air Distribution) kit through the outer firebox to the receptacle
mounted on the bottom of the appliance. For optional LHAD kit installation, please refer to the leaflet provided in
the kit.
6.3 in the event of a power failure
If the battery holder is equipped with 4 "AA" batteries, the appliance will still have on/off functions during a power
failure.
All manuals and user guides at all-guides.com
cable connector holes
To optional LHAD kit
electrical information
6.0 electrical information
L1
Power Supply
L2
Cable Connector
EN
35
W415-1707 / B / 06.04.18