6 - Slip the foot with the orthosis in
a spacious and stable shoe: The shoe
must be adjustable with laces or self-
fastening tape. Avoid using these with
ballerinas or pumps.
7 - Adjust the shoe straps.
8 - Lateral cushions can be inflated,
if more compression or support is
required. In order to do this, remove
the valve located above the cushion
and insert the tube that is provided;
start inflating and the tighten the valve
again before refolding and then glue it
back against the shell.
9 - It may loosen after it has been used
for some time; in this case, tighten the
straps again.
10 - If there is a local discomfort and/or
tingles, open the straps and reposition
the shells.
A
INFLATABLE STIRRUP ANKLE BRACE
C
CARE INSTRUCTION, MAINTENANCE
AND DISPOSAL
Wipe the plastic parts with a clean
wet cloth.
Hand wash in warm soapy water
(maximum 40 ° C), rinse thoroughly.
Wring out gently; do not bleach; dry
flat, away from a heat source (ex:
radiator), do not tumble dry; do not
iron; do not dry clean.
The device and packaging must
be disposed of in accordance
with respective local or national
environmental regulations.
B
D
EN