Fronius Rack de charge Instructions D'installation page 7

General
Description The charger rack is a modular and flexible mounting system for battery charging systems,
which can be arranged and expanded at the customer's discretion. Durability was a core
consideration behind the rack's development.
Scope of delivery The scope of delivery depends on the individual composition of the mounting system. The
following explains the installation of the charging rack.
Recommended -
tools -
-
-
-
Torques
The torque values for the following screw connections must be observed:
M6:
M8:
M10:
M12 (floor anchor):
Exploded draw-
ing
Socket wrench, size 13, 15 and 17
Cordless screwdriver
Hammer drill with drill bit (for securing to the floor or wall)
Hammer for installation with impact anchor
Injection mortar syringe for mounting with threaded rods in the asphalt
10 Nm
25 Nm
45 Nm
85 Nm
(1) (3)
(2)
(1) Upright 2000
(1)
(2) Foot
(3) Crossbeam 1500/2000
(2)
7