Foppapedretti TicToc Notice D'utilisation page 36

• ENGLISH •
USE
CAR SEAT COMPONENT
Fitting the adapter (fig. 83): Align and insert the right and left adapter into their housing on the stroller frame.
Press until a click is heard indicating that the adapter has been secured correctly.
WARNING: Before use, always make sure that both the adapters have been secured correctly to the chassis. When lifted
they must not detach from the chassis.
Removing the adapters (fig. 87): press button "a" to remove the adapter.
Fitting the accessory (fig. 84, 85): Align the coupling device of the car seat and press downwards, a click will indicate that
the carrycot has attached correctly to the stroller frame. Make sure that the accessory has been fastened correctly on
both sides.
WARNING: Before use, always make sure that the accessory has been secured correctly. When the accessory is lifted
upwards it must not detach from the pushchair chassis.
Removal of car seat (fig. 86): Put the car seat handle in the upright position, pressing the buttons on the side. See the
manual supplied with the car seat.
With one hand, grasp the car seat handle and, with the other, press button "A" alternately on both upper sides of the car
seat and remove the car seat by lifting it using the handle.
36