Foppapedretti TicToc Notice D'utilisation page 153

MAINTENANCE - Cleaning
The upholstery and seat belts can be cleaned using a clean cloth, warm water
and soap.
The plastic parts can be cleaned with mild soap and warm water.
⚠
Do not use harsh detergents such as solvents.
The car seat must not be used without the lining.
REMOVING THE LINING (fig. 6.1, 6.2, 6.3, 6.4)
Press the red release button and unhook the harness.
Remove the shoulder straps from cover and chassis in plastic, by pulling each
shoulder strap, including buckle, through its corresponding slot.
Do not remove the shoulder straps from the loop of the harness adjuster strap.
Remove the belt following the instructions in the "How to remove the harness
buckle" paragraph and remove the buckle from the cover.
Pull out the cover from shell front.
To put the lining back on, follow the reverse procedure.
IMPORTANT! Make sure that it is correctly assembled, check that none of the
belts are twisted.
How to remove the harness buckle (fig. 7.1, 7.2)
• Unclip the buckle (press the red release button).
• Locate the metal ring attached to the belt under the child lining.
• Rotate the metal ring and remove it through the shell and the padding.
How to replace the harness buckle
• Insert the metal ring and the crotch strap through the padding and the shell
(a). The metal ring, fastened to the belt, must come out from the shell (fig. 8.1).
• Insert the metal ring and crotch strap through the shell (b). Make sure it is
inserted and locked correctly (fig. 8.2).
• Pull the centre buckle to check that the crotch strap is correctly secured.
REMOVING THE CANOPY (fig. 9.1, 9.2, 9.3, 9.4)
• ENGLISH •
MAINTENANCE
37