seat belt in the front or rear passenger seat of the car (fig. 5.1).
•
Pass the horizontal seat belt (the lap belt) of the car through both belt guides
(a) and fasten the buckle (b) (fig. 5.2, fig. 5.3).
•
Pass the diagonal seat belt (the chest belt) of the car around the backrest of the
car seat, passing through the diagonal belt guide (c) (fig. 5.4).
•
If the vehicle's seat belt is too short, adjust its height to the lowest position. If it
is still too short, try another passenger seat.
•
Place the diagonal belt in the diagonal seat belt guide at the back of the seat
(fig. 5.4).
•
Take out all the slack in the seat belt, ensuring that there are no twists or kinks
in the seat belt (fig. 5.5).
WARNING:
•
DO NOT route the vehicle belt using any other path when using the child seat.
For assistant contact our Customer Service team.
•
DO NOT use 2 point vehicle belt to install this child seat.
•
ONLY install the child restraint rear-facing on forward-facing vehicle seats.
•
Make sure the child is properly secured in the child restraint, and the child
restraint is tightly installed in the vehicle.
☞ Check that the car seat has been installed correctly in the vehicle
•
Always secure the child with the belt when placed in the car seat.
•
Never leave the child unattended in the child seat when placed on high-up
surfaces (such as tables, etc.).
•
Make sure that the end of the belt does not get caught in moving parts (such
as automatic doors, escalators, etc.).
•
WARNING! The plastic parts of the car seat can heat up in the sun, causing
burns to the child. Protect the car seat from excessive heat, for example, by
using a light covering.
•
The car seat has only one installation position in the car, leaving the child
always semi-reclined.
•
Take regular breaks when travelling on long journeys. Your child can get tired
very easily. Avoid leaving the child in the car seat for too long.
• ENGLISH •
USING THE CAR SEAT
35