Midea MP10SCWBA2RCM Manuel Utilisateur page 14

Tools Needed
-Medium Philips screwdriver; -Tape measure or ruler; -Knife or scissors;
-Saw (optional to shorten the window adaptor for narrow windows).
Accessories
Your window installation kit fits windows from 67.5-123 cm(26.5-48") and can be shortened
for smaller windows.
Window Installation Kit Step 1 :
Preparing the Exhaust Hose
Assembly
Press the exhaust hose into the window
slider adaptor and unit adaptor, and clamp
automatically using the elastic buckles of
the adaptors.
Exhaust hose
Unit adaptor Window slider
adaptor
Installation
Part
Unit adaptor
Exhaust hose
Window slider adaptor
Bolt
Window slider A
Window slider B
Foam seal A (adhesive)
Foam seal B (adhesive)
Foam seal C (non-adhesive)
Security bracket and 2 screws
Drain hose
Drain hose adaptor(only for
heat pump mode)
Remote controller and battery
(for remote control models only)
Exhaust hose
assembly
Description
Step 2: Installing the Exhaust Hose
Assembly to the Unit
Insert the unit adaptor of the exhaust hose assembly
into the lower groove of the air outlet of the unit
while the adaptor hook is aligned with the
hole seat of the air outlet, and slide down the
exhaust hose assembly along the arrow direction
for installation.
Hook
Adaptor
Lower groove
13
Quantity
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
2 pc
2 pc
1 pc
1 set
1 pc
1 pc
1 set
Hole seat
Make sure the adaptor is
inserted into the lower
groove of the air outlet.