Publicité
tangent
Function
ENTER Tangent
Advanced Astromaster
TM
BBox
.
Tangent can be used as a shell startup command (See
There are two commands -
Remote system sends 'Q'
Response is the fixed format azimuth and altitude encoder step positions normalized as per
the Tangent devices. For example –
+01234<tab>-00123<\r>
Remote system sends 'P'
Response is a three digit status number, where the first digit is the number of altitude
encoder errors, the second is the number of azimuth encoder errors and the third is 0 for
power level low or 1 for power level OK. For example -
001<\r>
Note that Tangent devices are not capable of having their current RA and Dec position
queried. They only return their raw encoder position.
Keep in mind that some star mapping and planetarium packages might expect the Baud
rate to be
set
at 9600 when they are configured to communicate with a Tangent device.
Argo Navis
User Manual Edition 11, Dec 2014, for
Argo Navis™
TM
emulation mode. This is the protocol used by NGC-MAX
TM
, the Lumicom Sky Vector
TM
, Orion and the Software Bisque
SETUP SERIAL
™
Model 102/102B, Firmware Vers.3.0.0
Argo Navis™
TM
, Celestron
.).
232
Publicité
