Publicité
encctl
Function
Set the encoder TON and TOFF times in a manner analogous to the
menu function. However, unlike the
parameters will not be written to non-volatile memory (EEROM device). Therefore, any
change in TON and TOFF timing made by this command will not be persistent once the unit
is powered off.
encctl requires two integer arguments, the TON and TOFF times. Both arguments are in
the range [0..255]. Except for the special case where TOFF = 0, TOFF should be greater
than or equal to TON.
Example –
% encctl 17 17
%
Argo Navis
User Manual Edition 11, Dec 2014, for
Argo Navis™
menu, the TON and TOFF
SETUP ENC TIMING
™
Argo Navis™
SETUP ENC TIMING
Model 102/102B, Firmware Vers.3.0.0
218
Publicité
