Publicité
:MS# - slew to most recent RA/Dec – fill FROM PLANETARIUM object
:Me# - command motion east until quit is received
:Mn# - command motion north until quit is received
:Ms# - command motion south until quit is received
:Mw# - command motion west until quit is received
:P# - high precision toggle
:Q# - stop motion
:Qe# - stop motion east
:Qn# - stop motion north
:Qs# - stop motion south
:Qw# - stop motion west
:SC MM/DD/YY# - set current date
:SG sHH# - set offset from Greenwich
:SL HH:MM:SS - set current local time
:Sd sDD°MM# or Sd sDD°MM:SS - defines commanded declination
:Sg DDD°MM# or Sg DDD°MM:SS# - set current longitude
:Sr HH:MM.S# or Sr HH:MM:SS - defines commanded RA
:St sDD°MM# or St sDD°MM:SS# - set current latitude
:T+# - increment manual tracking rate by 0.1Hz
:T-# decrement manual tracking rate by 0.1Hz
:TM# - select manual tracking rate
:TQ# - select quartz tracking rate
:U# - toggle between long and short formats
:W1# :W2# :W3# :W4# - sets the current site number accordingly
:X# - EXIT out of meade mode. This is an Argo Navis
Keep in mind that some star mapping packages might expect the Baud rate to be
9600 when they are configured to communicate with a Meade scope.
If the planetarium program has an option to transmit the location, switch it off. Whenever
the location or date and time is transmitted to Argo Navis
invalidate the current alignment.
Argo Navis
User Manual Edition 11, Dec 2014, for
Argo Navis™
extension
TM
TM
™
Model 102/102B, Firmware Vers.3.0.0
Argo Navis™
then it is designed to
set
at
222
Publicité
