Ambu aBox 2 Mode D'emploi page 34

12.5. Connect external audio devices
12.5.1. Record sound during the procedure
•
Connect the displaying unit to an audio device via USB connection.
• A microphone icon in the Toolbar indicates if the microphone is compatible or not.
12.5.2. Play sound recorded during a procedure
•
Connect a speaker to the displaying unit's USB connector port to listen to audio during
video playback.
13. System Information and Software Updates/Upgrades
13.1. Device information page
You can view information about the displaying unit, e.g. software version, free disk space, etc.
View device information:
• Press the Settings tab, then press About.
• The Device info
•
Scroll down to see all the information.
13.2. Software updates/upgrades
Software updates/upgrades can be performed online or installed from a USB flash drive.
Enable online updates/upgrades:
• Press the Settings tab,
then press Setup.
• Press General settings.
• Press the ON/OFF slider next to
Enable online upgrade
the function (switch to green).
Install update/upgrade from USB flash drive:
Before you install software updates/upgrades via USB, ensure that USB connection has been
enabled for system upgrade and a USB flash drive connected to the displaying unit.
• Press the Settings tab,
then press About.
• Press System upgrade, then press
Upgrade through USB
•
Press the USB flash drive name, then
press Next.
•
Follow the instruction on the screen to
finish installing the update/upgrade.
34
page is shown on the screen.
1
1
to enable
2
.
3
2
3
4