Publicité
Les langues disponibles
Les langues disponibles
1.
PRODUCT TECHNICAL FEATURES
Geared-motor for use intensive on sliding gates. The
mechanical parts and the electric motor are in an oil, making
it possible to use the operator under the most severe
conditions.
•
Control unit on machine board
•
Safety against crushing : electro-mechanical limit switch
and adjustable oil bath clutch (part of geared-motor).
•
Release lever with a customized key.
•
Installation requires the foundation plate and a support Kit
(for fi xed or pivoting installation - see the Catalogue).
1.1
Destined use and Working range
Operator designed to automate the movement of sliding
gates for residential-use, or for condominium-use (this
requires pinion Z20) with
characteristics compatible with the
technical data indicated in
Any other use whatsoever is not authorised by
Aprimatic.
Caution
It is forbidden to use the product improperly or for different
aims than those intended.
It is forbidden to tamper with or modify the product in any
way whatsoever.
The product must only be installed with APRIMATIC
accessories.
1.2
Residual risks
!
Warning
Take care when the gate is opening as there is a risk of
injury of hands or other parts of the body in the operating
area of the operator gear.
!
Warning
The operator cannot be considered a supporting part or a
safety device of the gate; the gate must be provided with
adequate support systems and safety device.
1.3
Technical data
To see Tab.1.
!
Warning
The maximum weight of the gate is only a partial
parameter for determining the limits to use, as gate
sliding MUST also be taken into account.
1.4
Overall dimensions
To see Fig.1.
1.5
Supply inspection
Ensure that the package contains all the components listed
and check for damage. Make sure the model acronym
printed on the packaging corresponds to the one affi xed on
the gear motor (Fig.2).
See the list of the
COMPONENTS SUPPLIED WITH THE OPERATOR
those to be
PURCHASED SEPARATELY
AT80/E-AT83-AT85
(only "/E" versions).
.
.
1
TAB
in Tab.2 and Fig.3.
Tab.1
TECHNICAL DATA
Single-phase power supply
MAX absorbed power
MAX accessories current supply
MAX weight of gate
(pinion Z16)
(pinion Z20)
Rated thrust force
(1N = ~0,102Kg)
(pinion Z16)
(pinion Z20)
Rated wing speed
(pinion Z16)
(pinion Z20)
Lubricant quantity
Lubricant type
Protection degree
Operating temperature
Number of daily cycles
188
IB80*
190
Aprimatic
S.p.A.
MADE IN ITALY
TYPE : ............................
AprimOil xx
C.I. F
230V~ 50Hz xx W
xx A
xx g/min
mm/sec
xxx Nm
/
IPxx
XXX X00000000xxxxxx
and
- 13 -
SLIDING GATES
AT80/E
AT85
230V 50Hz ± 6%
330W
450W
1 A
2.5 A
1200 Kg
1200 Kg
-
800 Kg
1400 N
1720 Kg
-
1120 Kg
9,5 m/min
9,5 m/min
-
12 m/min
1,25 l
AprimOil DN22
Kluberoil Gem 1-46N
IP 44
-20 / +70 °C
-20° / +50°C
Max. 50
290
IF80*
35
Ø 40
!
AT83
380V
550W
2 A
1500 Kg
-
1870 N
-
9,5 m/min
-
Fig.1
5
Fig.2
Publicité
