Items In The Basic Menu - Fronius Primo 3.8-1 208-240 Instructions De Service

Items in the Basic The Basic menu contains the following items:
Menu
MPP Tracker 1
MPP Tracker 2
USB Eventlog
Input Signal
SMS / Relay
DC Tracking Mode:
MPP AUTO
FIX
MPP USER
Dyn. Peak Manager:
ON / OFF
Fix PV Voltage:
For entering the fixed voltage, 150 - 800 V
MPPT1 Start Voltage:
For entering the MPPT1 initial voltage, 150 - 800 V
MPP Tracker 2:
ON / OFF
DC operating mode:
MPP AUTO
FIX
MPP USER
Dyn. Peak Manager:
ON / OFF
Fix PV Voltage:
For entering the fixed voltage, 150 - 800 V
MPPT2 Start Voltage:
For entering the MPPT2 initial voltage, 150 - 800 V
Activating or deactivating the function to save all error messag-
es to a USB stick
AUTO / OFF / ON
Mode of operation:
Ext Sig. / S0-Meter / OFF
Trigger response (at Mode of operation „Ext. Sig."):
Warning / Ext. Stop
Connection type (at Mode of operation „Ext. Sig."):
N/C / N/O
Event Delay:
For entering the delay time from when an SMS is sent or from
when the relay should switch
900–86400 seconds
Event Counter:
For entering the number of errors following which an SMS is
sent or the relay should switch:
10–255
41