Remote Control - Marmitek SILVERLINE 8 Mode D'emploi

[7] INFO
Displays on screen information of the selected appliance
(when available).
[8] SETUP
Allows you to program your remote before the first use.
It also allows you to access to secondary functions of
certain A/V appliances (Shift). Press the SETUP key
followed by the function key you desire.
[9] Numeric keys 0 - 9
Work the same way as your original remote.
[10] AV
Selection of an external source (SCART input).
[11] -/--
In connection with the numeric keys, this button allows
you with some equipment to select directly channels
higher than 9.If you are in programming mode -
automatic code search - you can confirm the code.
[12] Menu
Menu On
[13] Exit
Menu OFF
[14] OK
Confirms menu selection.
[15] Navigation keys
Up, Down, Right, Left. Allows you to navigate into the
menu (TV, DVD, etc).
[16]
Teletext ON: Start/stop Teletext / Fasttext.
Teletext OFF: Stop Teletext / Fasttext.
Teletext Hold: Stop page change in Teletext /
Fasttext mode.
Teletext Mix: Allows you to mix the Teletext /
Fasttext and the picture of the selected channel.
[17] REW (rewind)
In VCR, DVD or CD mode: This button works the same
way as in your original remote.
IN TV mode: Coloured key (Red), control of videotext or
special equipment functions.
[18] FF (fast forward)
In VCR, DVD or CD mode: This button works the same
way as in your original remote.
IN TV mode: Coloured key (Blue), control of fasttext or
special equipment functions.
[19] PLAY
In VCR, DVD or CD mode: This button works the same
way as in your original remote.
IN TV mode: Coloured key (Yellow), control of fasttext
or special equipment functions.

REMOTE CONTROL

5