Adjusting the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SRC) repeatedly until "AUX" appears
on the main unit.
"AUX FRONT IN" appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Press (SYSTEM SETUP).
6 Press M/m to select "AUX-LVL," then press
(ENTER).
7 Press M/m to adjust the input level.
The input level is adjustable in single steps,
between –6 and +18.
8 Press (ENTER).
The setting is complete.
With the main unit
Press (SOURCE) instead of (SRC), rotate the volume
control dial instead of pressing M/m.
44
CD changer
M/m
Z
Z
X
SRC
Selecting the changer
1 Press (SRC) repeatedly until "CDC" appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Unit number
Disc number
Playback starts.
With the main unit
Press (SOURCE) instead of (SRC).
Skipping albums and discs
1 During playback, press M/m.
To skip
Press M/m
album
and release (hold for a
moment).
album
within 2 seconds of first
continuously
releasing.
discs
repeatedly.
discs
then, press again within 2
continuously
seconds and hold.
With the main unit
Use (3)/(4) (ALBUM –/+) instead of M/m.
ENTER
PL
MODE