Basic Operations; Playing Video Discs; To Stop Playback - Sony MEX-DV1000 Mode D'emploi

Basic Operations

Playing video discs

Depending on the disc, some operations may be different or restricted.
Refer to the operating instructions supplied with your disc.
OFF
1
Turn on your monitor, then select the
input source on your monitor
corresponding to this unit.
2
Press (OPEN) on the main unit.
3
Insert the disc (label side up).
4
Close the front panel.
Playback starts automatically.
If playback does not start automatically, press u.
5
If the DVD menu appears, press (1)(b)/(2)(B)/(3)(V)/(4)(v) to move
the cursor, then press (6) (u) to confirm.
With the card remote commander, press the </M/m/,/number buttons to move the cursor,
then press (ENTER) to confirm.

To stop playback

Press (OFF).
Note
Discs in DTS format are not supported. The sound is not output if the DTS format is selected.
14
Z OPEN
b/B/V/v u
OFF
Number
buttons
Z Z PL
X
u
</M/m/,
ENTER