Audio Setup; Audio Drc; Resetting All Settings - Sony MEX-DV1000 Mode D'emploi

Audio setup

(AUDIO SETUP), then select the desired item and option below, using M/m and (ENTER).
Select
For details on this procedure, see "Basic operation of visual setup" on page 36.
Follow the page reference for details. "z" indicates the default setting.
Item
SUPER AUDIO CD MODE
(page 32)
Selects the sound quality for Super
Audio CD playback.
SUPER AUDIO CD LAYER
(page 31)
Selects the playback layer (area) of
a Super Audio CD.

AUDIO DRC

*
Makes the sound clear when the
volume is low. Only for a DVD
conforming to Audio DRC
(Dynamic Range Control).
* Excluding DVD-R/DVD-R DL/DVD-RW in VR mode.

Resetting all settings

All settings (excluding parental control setting) in visual setup can be reset.
(RESET), then "YES" using M/m and (ENTER).
Select
For details on this procedure, see "Basic operation of visual setup" on page 36.
Note
Do not power off the unit while resetting, as it takes a few seconds to complete.
Option
HQ (z)
STD
2CH (z)
CD
STANDARD (z)
WIDE RANGE
Purpose
To have high sound quality.
To have standard sound quality.
To play 2-channel (stereo) area in
the Super Audio CD layer.
To play CD layer (if contained).
To select the standard setting.
To obtain the feeling of being at a
live performance.
39