Publicité
Les langues disponibles
Les langues disponibles
Remark:
1. During body fat test, it will display Err2 if hand pulse sensors get no-
input.
2. According to test result, 10 seconds have no operation or operation
arbitrarily key, will get into system recommendation to toughen pro-
gram.
TEST-Pulse Recovery:
It is a function to check the condition of pulse recovery that is scaled
from 1.0 to 6.0 while 1.0 means the best and 6.0 means the worst and
the increment is 0.1. In order to get rated correctly, users must test it
right after the workout finished by pressing „TEST" key and then stop
exercising. After the key is pressed, please also apply the heart rate de-
tector appropriately. The test will last for 1 minute and the result will
show in the display.
PULSE
1. Pulse Rate:
The whole set of heart rate detector include 2 sensors each side. Each
sensor has 2 pieces of metal parts. The correct way to get detected is
to gently hold both metal parts each hand. With the good signals pi-
cked up by the computer, the heart mark in the HEART RATE Display
shall flash. Sometimes the heart rate value is not useable, based on
wet hands or any other contact problems during exercising. If you need
high accuracy heart rate value you have to use an external heart rate
measurement with a pulse belt.
"WARNING" Heart rate monitoring system may be inaccurate. Over
exercise may result in injury or death. If you feel faint stop exercising
immediately.
INDOOR TRAININGS APP
The product can be used with the Kinomap app. This enables enter-
taining and interactive training with Android or IOS devices and saving
training data.
Sport, coaching, gaming and eSport are the keywords of the Kinomap
app. This contains many kilometers of real film material to exercise in-
side as if you were outside; Tracking routes and analysis of your perfor-
mance; Coaching content; Multiplayer mode; new posts daily; Official
indoor races and more ... The APP thus contains approx. 100,000 videos
recorded by athletes and 200,000 km of accumulated tracks for cycling,
running or rowing for currently approx. 270,000 members from all over
the world.
Download the app and connect
Scan the adjacent QR code with your smartphone / tablet or use the
search function at the Playstore (Android) or APP Store (IOS) to down-
load the Kinomap APP. Register and follow the instructions in the APP.
Activate Bluetooth on the smartphone or tablet and select the device
manager via the menu in the APP and then select the „Crosstrainer"
category. Then select your type designation via the manufacturer logo
„Christopeit Sport" in order to connect the sports equipment. Depen-
ding on the sports equipment, different functions are recorded by the
APP via Bluetooth or data is exchanged.
Attention: The Kinomap APP offers a free trial version for 14 days. Af-
ter that, fees will apply which are listed on the Kinomap homepage.
Further information can be found at: https://www.kinomap.com/en/
WATT TABELLE
RPM and Power in Watt of Level 1 - Level 24 for AX 8000
Art.-Nr. 2009
LEVEL
20 RPM
30 RPM
WATT
WATT
1
7
15
2
9
18
3
10
20
4
11
22
5
12
25
6
14
27
7
15
30
8
16
33
9
18
36
10
19
38
11
20
41
12
22
43
13
23
46
14
24
49
15
26
52
16
27
55
17
28
58
18
30
62
19
31
65
20
32
68
21
34
71
22
35
74
23
36
77
24
38
80
Remarks:
1.The power consumptions (Watt) are adjusted by measuring the dri-
ving speed (min-1) of axle and the braking torque (Nm).
2.Your equipment was tested to fulfill the requirements of its accuracy
classification before shipment, If you have doubts about the accuracy,
please contactwith your local retailer or send it to accredited test labo-
ratory to ensure or calibrate it.
(Please note that a deviation tolerance as noted on page 15, is permis-
sible.)
Error Messages
Each time the computer is restarted, it will run a quick test for functio-
nality. If something is not okay, it indicates possible errors:
E 1 This symbol and a warning tone appear if the wiring is incorrectly
connected or there is a fault in the resistance setting. Check all cable
connections, especially at the connectors. After eliminating the error,
press and hold the „Start / Stop" button for 2 seconds to reset the sys-
tem to 0.
IOS AND ANDROID APP
22
40 RPM
5 0 R P M
60 RPM
70 RPM
WATT
WATT
WATT
WATT
19
33
40
43
24
40
50
55
29
46
60
67
34
54
70
82
39
61
80
93
44
68
90
106
49
74
100
118
53
81
110
130
59
88
120
143
64
95
130
155
69
103
140
167
73
110
150
180
79
117
160
191
84
124
170
205
89
132
180
220
94
140
190
235
99
149
200
251
104
157
210
267
109
164
220
279
114
172
230
290
120
179
240
301
127
186
250
314
133
193
260
330
139
201
270
345
GB
80 RPM
WATT
61
76
90
107
125
140
155
171
186
202
218
232
250
268
286
304
323
342
356
370
388
406
420
438
Publicité
