Publicité
Les langues disponibles
Les langues disponibles
STEP 5:
Installation of the footrests (43) at footrest holder
(44).
1. Push the right footrest (43R) onto the footrest
holder (44R). Adjust the holes in the parts so that
they are aligned.
2. Push the screws M6x50 (42) from above through
the holes. Push from the opposite side on a washer
(45) and spring washer (46), screw on a handgrip nut
(47) and tighten firmly.
3. Install the left footrest (43L) on the left footrest
holder (44L) as described in 1. – 2. (Note: The posi-
tion adjusted in this way should always be equal at
both sides. The right and left footrests can be dis-
cerned by the edges of the longitudinal sides of the
footrests. The high edges of the footrests (43) must
point inwards (towards the main frame.) The posi-
tions can change as desired at all times by removing
the carriage bolts (42) and sliding the footrests on
the footrest brackets to get a comfortable exercise
position close to the hand grip.)
STEP 6:
Attach the handle grip (3) at support (30).
1. Push a spring washer (32) and a washer (31) onto
each screw M8x20 (33).
2. Place the handle grip (3) against the holder at
support (30) and tighten the handle grip (3) at han-
dlebar support (30) firmly.
3. Attach the grip cover (18) at handle grip (3) and
secure with screw M5x15 (102).
STEP 7:
Attach the computer (1) at support (30).
1. Put the plug of connection cable (34) into the
plug from computer (1) backside.
2. Insert the plug of pulse connection cables (16) to
the jack of the computer (1) and attach the comput-
er (1) to top monitor bracket of front post (30) with
screws M5x10 (15). (Attention: Ensure that the ca-
ble loom are not crunched or pinched during instal-
lation.)
STEP 8:
Attach the power.
1. Please insert the plug of adaptor (13) to the pow-
er plug (39) at end of chain guard (98).
2. Please insert the plug of adaptor (13) to the jack
of wall power (230V~50Hz).
STEP 9:
Checks
1. Check the correct installation and function of all
screwed and plug connections. Installation is thereby
complete.
2. When everything is in order, familiarize your-
self with the machine at a low resistance setting and
make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe
place as these may be required for repairs or spare
parts orders becoming necessary later.
18
GB
Publicité
