Technical Data; Spare Parts - Kerbl 17450 Mode D'emploi

Maintenance
Check all components for signs of damage before every use. Damaged parts should only be repaired by a qualified professional or the manufac-
turer. If carrying out any repairs, only use original spare parts.
Changing the soldering tip
CAUTION!
Hot soldering tip! Danger of fire and injury!
• Allow the soldering tip to cool down before changing it.
Proceed as follows:
1. Loosen the clamping screw on the soldering tip with an Allen wrench and remove the soldering tip.
2. Insert the new soldering tip until it stops and then tighten the clamping screw.
Disposal
Solder waste is hazardous waste. Observe any local authority waste disposal regulations.

Technical data

Article number
Input voltage safety transformer
Output voltage safety transformer
Power
Max. temperature at the burning ring ca. 620 °C
Heating time
Diameter of the burning tip
Cable length
Weight

Spare parts

17455 Burning rod with burning tip and plug
17451 Burning tip 18 mm
17452 Burning tip 15 mm
17463 Screw for burning tips 17451 and 17452
17462 Heating cartridge
1711 Device holder
Declaration of conformity
Albert KERBL GmbH hereby declares that the product / device described in these instructions complies with the fundamental requirements and other relevant stipulations of Directive
2004/108/EC and 2006/95/EC. The CE mark confirms compliance with the Directives of the European Union. The declaration of conformity can be viewed by visiting http://www.kerbl.
de.
Electronic scrap
Disposing of this device after its service life is the responsibility of the operator. Please consult the valid national regulations. The device must not be disposed of in
household waste. In accordance with the stipulations of the EU Directive on the Disposal of Electrical and Electronic Devices, the device can be disposed of free of
charge at the local waste collection or recycling centre. Alternatively, it can be returned to retailers who offer a collection service. The proper disposal helps to ensure
environmental protection and prevents any adverse effects on human health and the environment.
Albert Kerbl GmbH 84428 Buchbach, Germany www.kerbl.com
17450
230 V, 50 Hz
24 V
210 W
ca. 11 Minuten
18 mm
3m
ca. 630 g