Olimpia splendid CALDORAD HUMI Serie Mode D'emploi Et D'entretien page 25

• Only use the appliance in vertical position (handle "3" above); every
other position may create a dangerous situation.
• Entirely straighten the power cord.
• Place the appliance in an appropriate environment and on a stable and flat surface.
• Make sure that curtains or other objects do not obstruct the air flow (fig. 3).
• Leave at least 1m of free space on the sides, behind the appliance and above it (fig.
1).
• Make sure the knob (14) is set to "O".
• Connect the plug to the power socket.
• Make sure the mains data correspond to
what is described on the data plate of the
appliance.
• Arrange cord away from traffic areas so
that it will not be tripped over.
3 - USE
Knob "14"
• Knob set to "O" :
• "MINIMUM POWER" function : rotate the knob to "
• "MEDIUM POWER" function :
"MAXIMUM POWER" function : rotate the knob to "
•
Knob "13" - Thermostat
• Start the appliance by rotating the knob (14) to the desired power position; the
indicator (15) lights up.
• To set the room temperature to a specific value (thermostatation), rotate the knob
"13" clockwise until it stops (position "+").
• Once the desired temperature of
the room has been reached, slowly
rotate the knob "13" anticlockwise
until the appliance switches off.
• At this point, the appliance will
reactivate automatically when the
room temperature lowers beyond
the set limit and will switch off
again once the room temperature
reaches the set value.
appliance OFF
rotate the knob to "
•
" position.
• •
" position.
• • •
" position.
CALDORAD HUMI
13
15
14
EN - 9