probst FXAH-120-GRABO-GREENLINE Instructions D'emploi page 31

Operation
4.2 Device operation
4.2.1 Connecting a lifting strap to the device
•
The four metal eyelets around the handle are
used to attach the lifting strap.
•
Secure one of the buckles (at each end of
the strap) in an eyelet provided for this
purpose.
•
Carrying strap can be placed around the
operator's shoulder for load support.
4.2.2 Replacing the rubber foam seal
•
Remove the damaged or used rubber foam
seal by pulling it out.
•
Carefully press the new rubber foam seal into
position.
4.2.3 Change filter
•
Use the tip of a screwdriver to remove the
plastic plug (ring) and filter on the bottom of
the device.
•
Insert a new filter (or cleaned filter) and push
the plastic plug (ring) back in to secure the
filter.
58500014 11 / 16 GB