Napoleon High Country NZ7000 Instructions D'installation Et D'opération page 22

22
5.1 FINISHING MATERIAL
EN
WARNING: Screws used to fasten fi nishing materials to the face of the appliance above the guillotine
screen and door must not penetrate more than 1/2" (13mm) into the sheet metal front panels. Refer to
the "DIMENSIONS" section for specifi c requirements.
W415-1642 / 04.15.16
NON-COMBUSTIBLE BOARD
FACE MUST HAVE A
MIN. 8' (2.4M) HEIGHT
OF NON-COMBUSTIBLE
BOARD DEPENDING
UPON THE CEILING
HEIGHT
COMBUSTIBLE
FACING AND WOOD
FRAMING MAY
START AT 8' (2.4M)
ABOVE THE BASE
OF THE UNIT.
NON-COMBUSTIBLE
BOARD FROM THE
FACING ON
SIDE OF THE UNIT
STUDS,CLAD WITH
TO COMBUSTIBLES
NON-COMBUSTIBLE
MINIMUM ENCLOSURE
CEILING HEIGHT 96" (2438MM).
BOARD.