Télécharger Imprimer la page

Napoleon High Country NZ7000 Instructions D'installation Et D'opération page 11

Masquer les pouces Voir aussi pour High Country NZ7000:

Publicité

Les langues disponibles

Les langues disponibles

3.1
LOCATION AND CLEARANCES
DO NOT INSTALL INTO ANY AREA HAVING A HEIGHT LESS THAN 8 FEET (2.4M) (CEILING OF
ENCLOSURE TO APPLIANCE BOTTOM, EXCLUDING HEARTH HEIGHT).
IMPORTANT
This appliance, fully dressed, weighs 1400lbs (635kg). Ensure there is adequate fl oor support for the
appliance, chimney and facing material. Some material could weigh thousands of pounds.
We recommend that the appliance be secured to the fl oor in all cases.
Using the door opening as a datum, level the appliance by shimming underneath the appliance. Bend the tabs
down and secure the appliance to the fl oor.
3.1.1 VENTILATION OPENINGS
The appliance enclosure should be provided with suffi cient air circulation to avoid a fi re hazard. Install
ventilation grilles (minimum openings of 40 sq. inches (0.03 sq. meters) at both fl oor and ceiling levels of the
enclosure. These grilles must not restrict the fl ow of heat by more than 25%. Do not install into any area having
a height less than 8 ft (2.4m) (ceiling of enclosure to appliance bottom, excluding hearth height). The location
of windows, doors and the traffi c fl ow in the room where the stove is to be located should be considered. If
possible, you should choose a location where the chimney will pass through the house without cutting a fl oor
or roof joist.
11
EN
TABS
W415-1642 / 04.15.16

Publicité

loading

Ce manuel est également adapté pour:

High country nz8000