Schindelhauer Bikes Oskar Notice D'utilisation page 66

When choosing a child's seat make sure that it matches the
installation requirements in Figure 1.
• fits round seat tubes of 40 mm diameter
• inner distance between mounting rails of min. 75
mm
Before lifting your child into the child's seat, make sure that
your e-bike is standing securely. The kickstand cannot
guarantee the necessary stability in all scenarios and can
withstand an axial load of max. 25 kg. Prevent your e-bike
from tipping over by additional measures if necessary.
Mind the total weight limitation of max. 155 kg.
suitable for seat tube
diameter of 40 mm
*
inner distance
between mounting rails
min. 75 mm
Figure 1
Trailers can be attached to the rear axle of e-bike models Oskar, Heinrich and
Hannah. The necessary adapter is usually supplied with the trailer. Please
mind the regulations and safety instructions of the trailer manufacturer.
*
64
When using a child trailer, make sure that the rear light of
your e-bike does not blind your child!
According to German traffic law, trailers with a width of 60
cm and above must be equipped with a rear light. Please
mind your local traffic laws that might differ from German
legislation.