Publicité
Les langues disponibles
Les langues disponibles
c) Display field "WIND"
Briefly press the button " " (16) or " " (18) on the rear until "WIND" blinks on the display (see arrow
in the image below).
The following setting options and displays are available now:
Switching the display data
Briefly press the button "SET" (7) on the rear repeatedly to switch between the following displays:
• Wind-chill factor (display "WIND CHILL"), wind direction display using the abbreviations of the points of the
compass (e.g. "NNE" for "NORTH-NORTH-EAST")
• Wind-chill factor (display "WIND CHILL"), wind direction indication in degrees (e.g. 22.5°)
• Temperature on the wind sensor, wind direction display using the abbreviations of the points of the compass (e.g.
"NNE" for "NORTH-NORTH-EAST")
• Temperature on the wind sensor, wind direction indication in degrees (e.g. 22.5°)
People sometimes perceive temperatures completely differently under certain circumstances than that
displayed by a thermometer. Especially in case of low outdoor temperatures, the temperature on naked
skin fells a lot colder the more the wind blows.
The "wind-chill" is a cooling effect defined for naked skin with a theoretical surface temperature of 33°C
and a wind speed of over 2.6m/s.
The higher the wind speed and the lower the actual ambient temperature, the more perceivable the
wind-chill effect.
Switching the units for the display of the wind speed
Keep the button "SET" (7) on the rear depressed until the unit for the display of the wind speed changes. Release
the button again. Start again if you want to change the unit once again.
You can select between "km/h", "mph", "m/s" and "knots".
Viewing the value memory for the wind speed
Briefly press the button "MEMORY" (17) repeatedly to switch between the following displays:
• Current wind speed
• Maximum wind speed today (display "DAILY MAX")
• Gust wind speed (display "GUST")
• Maximum gust wind speed today (display "GUST" and "DAILY MAX")
89
Publicité
