Conrad Electronic DV928 Notice D'emploi page 85

c) Selecting the function
If the weather station is in normal mode (e.g. not during sensor search or similar), you can select the individual
functions by briefly pressing the button " " (16) or " " (18) on the rear.
The selected function blinks on the bottom of the display. Additional settings and displays are possible for each
function. These are explained in the next chapter. Below in the display illustration you can see the position of the
symbols and the respective display section.
A
A Current air pressure, air pressure at sea level, air pressure values of the past 24 hours, bar diagram for the air
pressure, temperature and air humidity progression on outdoor sensor channel 1, moon phases of the last/next
39 days
B Wind direction, wind speed, wind-chill factor
C Indoor/outdoor temperature, indoor/outdoor humidity, trend display, minimum/maximum value, °C/°F switching
D Rain data, value memory, switching measuring units
82
B
D
C