Conrad Electronic DV928 Notice D'emploi page 68

A Top display for the METEOTIME data (weather data received via the DCF signal), DCF time/date as well as the
sunrise/sunset times
B Bottom display for the measuring data of the indoor sensors (indoor temperature, air humidity and air pressure)
and outdoor sensors (e.g. outdoor temperature, air humidity, wind speed, wind direction, rain quantity)

There are arrow buttons on the rear and the right side of the weather station an a "SET" button each,
which have completely different functions, however.
The buttons on the right " " (1), " " (2) and "SET" (3) serve for the METEOTIME part of the weather
station (top display). The buttons on the rear " " (16), " " (18) and "SET" (7) serve for operation of
the sensor part (bottom display).
The button "SET" (7) on the rear serves for operation of the remaining functions.
1 Button " " for settings in the METEOTIME display (e.g. select country/city)
2 Button " " for settings in the METEOTIME display (e.g. select country/city)
3 Button "SET" for settings on the METEOTIME display or switching the display (city, time/date, sunrise/sunset
time and activation of the setup mode for country, city time zone, language and display contrast)
4 Button "CHANNEL" for selecting the temperature/air humidity sensors (if more than one temperature/air humidity
sensor is used; one is contained in the delivery)
5 Button "DAY/NIGHT" for switching the METEOTIME forecast from day to night and vice-versa
6 Button "LIGHT" for activating the background illumination
7 Button "SET" for selection of the functions or activation of the setup mode for the sensors
8 Button "TEST" to start the reception test for the METEOTIME signal
9 Button "MEM":
10 Button "ALARM/CHART" for setting a limit alarm for temperature/air humidity, wind, rain as well as for switching
the bar graph display for air pressure, outdoor air humidity (channel 1) and outdoor temperature (channel 1)
11 Slide switch "LIGHT SENSOR" (to select operating mode for background illumination)
12 Slide switch "SENSITIVITY" (to set the sensitivity for the brightness sensor)
13 Unfoldable base
14 Battery compartment cover (battery compartment for 4*AA size batteries)
15 Opening for wall fastening
16 Button " " for selection of the sensors/display ranges (temperature/air humidity, wind, rain, air pressure) or
settings on the measuring data display
17 Button "MEMORY", e.g. for the display of minimum/maximum data for temperature, air humidity, wind and rain
18 Button " " for selection of the sensors/display ranges (temperature/air humidity, wind, rain, air pressure) or
settings on the measuring data display
19 Button "HISTORY" to display the air pressure values of the past 24 hours
20 Socket for external power pack unit (permanent operation of the background illumination requires connection of
the supplied external power pack unit)
21 USB port (for connection of the weather station to a computer)
22 Reception antenna for the sensors
65