NSK Ti-Max X-SG25L Mode D'emploi page 9

4. Connecting and Disconnecting the Handpiece and the Motor
4-1 Connecting
1) Insert the handpiece direct to the motor (Fig. 1). When connecting an optic handpiece,
screw the handpiece until it clicks and locks into position.
2) Confirm that the handpiece is firmly connected to the motor.
4-2 Disconnecting
Hold the motor and the handpiece, then pull apart.
CAUTION
• Do not connect or disconnect the handpiece until the motor has completely stopped.
• Connect ONLY to E type motors (ISO 3964 (EN ISO 3964)).
• Do not exceed the Max. Rotation Speed (Motor) shown in "10. Specifications".
All manuals and user guides at all-guides.com
Fig. 1
7