NSK Ti-Max X-SG25L Mode D'emploi page 24

8-7 Sterilization
Sterilize the product by autoclave sterilization. After each patient sterilize as noted below.
1) Insert into an autoclave pouch. Seal the pouch.
2) Autoclavable under the conditions below.
Exposure at 132°C for more than 15min.. Drying for more than 30 min.
3) The handpiece should remain in the autoclave pouch until required for use.
CAUTION
• Be sure to clean and lubricate the handpiece prior to autoclaving. If blood remains on the internal surface it can become
clotted and cause product failure.
• Do not autoclave the product with other instruments even when it is in a pouch. This is to prevent possible discoloration and
damage to the product from chemical residue on other instruments.
• Do not heat or cool the product too quickly. Rapid change in temperature could cause damage to the product.
22
All manuals and user guides at all-guides.com