NSK Ti-Max X-SG25L Mode D'emploi page 23

All manuals and user guides at all-guides.com
NOTICE
• NSK recommends the use of "Spray Mist Absorber" (Y900084) to prevent oil mist expelling out of the handpiece head.
Chuck cleaning (X-SG93L / X-SG93)
Clean the Push Button chuck once a week.
1) Mount the Tip Nozzle into the spray can port.
2) Lubricate the chuck directly through the bur insertion hole (Fig. 12).
3) Lubricate handpiece by using NSK PANA SPRAY Plus / PANA SPRAY (Fig. 9).
Fig. 12
CAUTION
• If the chuck is not regularly cleaned the chuck grip may be weakened and the bur may be accidentally released during use.
21