Publicité
Les langues disponibles
Les langues disponibles
B
Using the appliance
Changing the program mid-cycle
• A program can only be changed if it has been running only for a short period of time,
otherwise the detergent may have already been released or the the wash water with
detergent has already been drained. If this is the case, the dishwasher needs to be reset and
the detergent dispenser must be refilled.
To reset the dishwasher, follow the instructions below:
1. Press the Start/Pause to stop the machine, then press any program button for more than
3 seconds, the selected program will be cancel.
2. After the selected program be canceled, you can press the desired program.
3. Press the Start/Pause button, the dishwasher will start.
Forget to add a dish?
A forgotten dish can be added any time before the detergent dispenser opens. If this is the
case, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. After the spray arms stopped working, you can open the door completely.
3. Add the forgotten dishes.
4. Close the door.
5. Press the Start/Pause button after 10 seconds, the dishwasher will start.
After 5 sec
40
EN
B
Using the appliance
WARNING
It is dangerous to open the door mid-cycle, as hot steam
may scald you.
Auto Open
After washing, the door will open automatically to achieve better drying effect.
NOTE
The dishwasher door must not be blocked when set to open
automatically.
This can disrupt door lock functionality.
41
EN
Publicité
