B
Using the appliance
WATER HARDNESS
German
French
British
Mmol/l
°dH
°fH
°Clarke
0 - 5
0 - 9
0 - 6
0 - 0,94
6 - 11
10 - 20
7 - 14
1,0 - 2,0
12 - 17
21 - 30
15 - 21
2,1 - 3,0
18 - 22
31 - 40
22 - 28
3,1 - 4,0
23 - 34
41 - 60
29 - 42
4,1 - 6,0
35 - 55
61 - 98
43 - 69
6,1 - 9,8
1°dH=1.25 °Clarke=1.78 °fH=0.178mmol/l
The factory setting: H3
Every cycle with a regeneration operation consumes additional 2.0 litres of water, the
1)
energy consumption increases by 0.02 kWh and the program extents by 4 minutes.
NOTE
Please check the "Loading The Salt Into The Softener", if
your dishwasher lacks salt.
NOTE
If your model does not have any water softener, you may
skip this section.
Water Softener
• The hardness of the water varies from place to place. If
hard water is used in the dishwasher, deposits will form
on the dishes and utensils.
• The appliance is equipped with a special softener that
uses a salt container specifically designed to eliminate
lime and minerals from the water.
30
Regeneration
Salt
Water
occurs every
consumption
softner level
X program
(gram/cycle)
sequence
1)
No
H1
regeneration
H2
10
H3
5
12
H4
3
20
H5
2
30
H6
1
60
EN
B
Preparing and loading dishes
• Consider buying utensils which are identified as dishwasher-proof.
• For particular items, select a program with the lowest possible temperature.
• To prevent damage, do not take glass and cutlery out of the dishwasher immediately after
0
the program has ended.
9
For washing the following cutlery/dishes
Are not suitable:
- Cutlery with wooden, horn china or mother-of-pearl handles
- Plastic items that are not heat resistant
- Older cutlery with glued parts that are not temperature resistant
- Bonded cutlery items or dishes
- Pewter or cooper items
- Crystal glass
- Steel items subject to rusting
- Wooden platters
- Items made from synthetic fibres
Are of limited suitability:
- Some types of glasses can become dull after a large number of washes
- Silver and aluminum parts have a tendency to discolour during washing
- Glazed patterns may fade if machine washed frequently
Recommendations for loading the dishwasher
• Scrape off any large amounts of leftover food. Soften remnants of burnt food in pans.
It is not necessary to rinse the dishes under running water. For best performance of the
dishwasher, follow these loading guidelines.
(Features and appearance of baskets and cutlery baskets may vary from your model.)
Place objects in the dishwasher in the following way:
• Items such as cups, glasses, pots/pans, etc. must face downwards.
• Curved items, or ones with recesses, should be loaded aslant so that water can run off.
• All utensils are stacked securely and can not tip over.
• All utensils are placed in the way that the spray arms can rotate freely during washing.
• Load hollow items such as cups, glasses, pans etc. With the opening facing downwards so
that water cannot collect in the container or a deep base.
Using the appliance
31
EN