Publicité
Les langues disponibles
Les langues disponibles
B
Using the appliance
When to refill the rinse aid
The regularity of the dispenser needing to be refilled depends on how often dishes are
washed and the rinse aid setting used.
• The Low Rinse Aid indicator (
) will be lit when more rinse aid is needed.
• Do not overfill the rinse aid dispenser.
Function of detergent
• The chemical ingredients that compose the detergent are necessary to remove, crush and
dispense all dirt out of the dishwasher.
• Most of the commercial quality detergents are suitable for this purpose.
WARNING
Proper Use of Detergent
• Use only detergent specifically made for dishwashers
use. Keep your detergent fresh and dry.
• Do not fill detergent into the dispenser until you are ready
to start the dishwasher
Dishwasher detergent is corrosive! Keep dishwasher
detergent out of the reach of children.
Filling the rinse aid reservoir
1. Remove the rinse reservoir cap by lifting up the handle.
34
EN
B
Using the appliance
2. Pour the rinse aid into the dispenser, being careful not to overfill.
3. Close the cap after all.
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is designed to
adjust the consumption by user. Follow the below steps.
1. Open the door, switch on the appliance.
2. Within 60 seconds after step 1, press the Self-cleaning button more than 5 seconds, and
then press the Delay + Button to enter the set model, the rinse aid indication blinks as 1Hz
frequency.
3. Press the Self-cleaning button to select the proper set according to your using habits,
the sets will change in the following sequence: d3->d4->d5->d1->d2->d3. The higher the
number, the more rinse aid the dishwasher uses.
4. Without operation in 5 seconds or Press the Power button to end the setup model.
35
EN
Publicité
