Charging The Battery - brennenstuhl RUFUS 1500 MA Mode D'emploi

BLUETOOTH SPEAKER (RUFUS 3010 MA ONLY)
To use the speaker via Bluetooth, press the Bluetooth button with the Bluetooth symbol on the
back of the device: the LED above the Bluetooth button lights up.
Switch on the Bluetooth function on the smartphone: the floodlight is displayed under
"HB RUFUS 1" in the selection list. Now activate HB RUFUS 1 on the smartphone: the light emits
an acoustic signal "Beep".
Any music on the smartphone can now be played via the speaker of the floodlight. The volume is
controlled via the smartphone.
To terminate the connection, deactivate "HB RUFUS 1" on the smartphone: the floodlight
indicates this by means of an acoustic signal: "Beep". The connection can also be terminated by
switching off the Bluetooth function via the Bluetooth switch of the floodlight (without acoustic
signal).

CHARGING THE BATTERY

Only charge your battery using the supplied charging cable type A/C.
A port type C is available as charging input. The charging cable can be plugged into
a conventional USB charger at the other end.
Only use a tested USB power source (e.g. charger, computer) with a maximum output
voltage of 5 V:
Connection: USB source – charging cable type A/C (3) – charging port (1).
During charging, the charging indicator flashes, it is illuminated constantly when the battery is
fully charged.
CHARGING EXTERNAL DEVICES VIA USB
The floodlight offers a USB power bank function. An external device like a smartphone or
tablet can be connected to the USB port (2) and charged. The number of possible charge cycles
depends on the type of external device and on the charge level of the floodlight's battery.
19P087_088 Mobiler Akku LED Akku Strahler Rufus 0532453_2320 200603.indd 11
1 Charging port type C
2 Powerbank USB
3 Charging cable type A/C
2
1
3
Operating instructions
D
11
03.06.2020 12:24:58