probst FXAH-120-GRABO-GREENLINE Instructions D'emploi page 34

Maintenance and care
5 Maintenance and care
5.1 Suction plate
•
Clean the suction plate from adhering objects, dirt and dust at least once a day. Clean sponge
rubber with compressed air and/or water jet. → For this remove the rubber foam seal.
•
Replace damaged suction plate (cracks, holes, ripples) immediately.
•
Use cold cleaner to clean the device (do not use petroleum ether or corrosive liquids).
5.2 Leak test
•
Check the unit for leaks before each use.
5.3 Annual audit
•
Check all components, especially the seal. Inspection for cracks, wear, corrosion and functional
reliability by an expert.
5.4 Hints to the type plate
•
Type, serial-number and production year are very important for the identification of your device. If
you need information to spare-parts, warranty or other specific details please refer to this
information´s.
•
The maximum carrying capacity/working load limit (WLL) is the maximum load which can be
handled with the device. Do not exceed this carrying capacity/working load limit (WLL).
•
If you use the device in combination with other lifting equipment (Crane, chain hoist, forklift truck,
excavator) consider the deadweight of the device.
Example:
5.5 Hints to the renting/leasing of PROBST devices
With every renting/leasing of PROBST devices the original operating instructions must be
included unconditionally (in deviation of the user´s country's language, the respective translations of
the original operating instructions must be delivered additionally)!
6 Disposal / recycling of devices and machines
The product may only be taken out of service and prepared for disposal / recycling by qualified
personnel. Correspondingly existing single components (such as metals, plastics, liquids,
batteries/rechargeable batteries etc.) must be disposed of/recycled in accordance with the
nationally/country-specific applicable laws and disposal regulations!
The product must not be disposed of in household waste!
58500016 14 / 16 GB