Publicité
Les langues disponibles
Les langues disponibles
EnglisH
8
-
Always make sure the lid is assembled properly and the measuring cup is inserted properly in
the lid before you switch on the blender.
-
Cut fruit into smaller pieces before you put it in the filter.
-
Soak dried ingredients, such as soy beans, before you put them in the filter.
Built-in safety lock
This feature ensures that you can only switch on the blender if you have properly assembled the
blender jar, the dry mill beaker or the wet mill beaker on the motor unit. If the blender jar or mill
beaker is correctly assembled, the built-in safety lock will be unlocked.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
Before first use
Thoroughly clean the parts that come into contact with food before you use the blender for the
first time (see chapter 'Cleaning').
Using the appliance
Blender
The blender jar is intended for fine pureeing, chopping and blending. In the blender jar you can
prepare soups, sauces and milk shakes. You can also use it to process vegetables, fruit, meat, pancake
batter etc.
Preparing the blender jar for use
1
Assemble the sealing ring on the blender blade unit (Fig. 2).
2
Insert the blade unit into the opening in the bottom of the blender jar (1). Screw the blade
unit clockwise onto the bottom of the blender jar (2) until the blade unit it is fixed
properly. (Fig. 3)
3
Put the blender jar with the blade unit attached on the motor unit and fix it by turning it
clockwise ('click'). (Fig. 4)
The blender jar can be mounted in two positions: with the handle on the right side or on the left
side.
4
Put the mains plug in the wall socket.
Using the blender jar
1
Put the ingredients in the blender jar.
2
Assemble the lid on the jar.
3
Insert the measuring cup into the opening in the lid. (Fig. 5)
4
Turn the control knob to speed 1 or 2.
Turn the control knob to the pulse setting if you want to process ingredients very briefly.
Do not let the blender with the blender jar attached run for more than 3 minutes at a time.
Always let the blender cool down to room temperature after each batch you process.
Tips
-
If you want to crush ice cubes, put not more than 6 ice cubes (of approx. 25x35x25mm) in the
blender jar. Then turn the control knob to pulse position a few times.
All manuals and user guides at all-guides.com
Publicité
