Publicité
Les langues disponibles
Les langues disponibles
-
Cut meat or other solid ingredients into smaller pieces before putting them in the blender jar.
-
Do not process a large quantity of solid ingredients at the same time. To get good results, we
advise you to process these ingredients in a series of small batches.
-
To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the
lid onto the rotating blades.
Disassembling the blender jar
1
Remove the mains plug from the wall socket.
2
Remove the lid with the measuring cup from the blender jar.
3
Turn the blender jar with the blade unit attached anticlockwise to remove it from the motor
unit.
4
Clean all removable parts immediately after use (see chapter 'Cleaning').
Filter
With the filter you can make delicious fresh fruit juices, cocktails or soy milk. The filter prevents pips
and skins from ending up in your drink.
Never overload the filter. Do not put more than 70g soy beans (unsoaked weight) or 150g fruit
in the filter at the same time.
Preparing the filter for use
1
Mount the blender jar with the blade unit attached on the motor unit and fix it by turning it
clockwise ('click') (Fig. 4).
The blender jar can be mounted in two positions: with the handle on the right side or on the left
side.
2
Put the filter in the blender jar (Fig. 6).
Make sure that the grooves of the filter fit exactly onto the ribs inside the blender jar.
3
Put the mains plug in the wall socket.
Using the filter
1
Assemble the lid on the jar.
2
Put the ingredients in the filter. (Fig. 7)
3
Pour water or another liquid (milk, juice, etc.) into the blender jar.
4
Insert the measuring cup into the hole in the lid.
5
Let the blender run for approx. 40 seconds.
6
Switch off the blender and remove the blender jar with the blade unit attached from the
motor unit.
Do not remove the lid. Leave the measuring cup and the filter in the jar.
7
Turn the lid to the unlock position and pour out the drink through the pouring lip of the
blender jar. (Fig. 8)
Tip: For optimal results, put the jar with the remaining ingredients back onto the blender and let it run for
a few more seconds.
Note: When you process a large quantity, we advise you not to put all the ingredients in the filter at the
same time. Start to process a small quantity and let the blender run for a few seconds. Then switch off
the blender and add another small quantity. Repeat this procedure until you have processed all the
ingredients. Always keep the lid on the blender jar during processing.
All manuals and user guides at all-guides.com
EnglisH
9
Publicité
