I-Tech Mio-Sonic Mode D'emploi page 22

Surge
EN 61000-4-5
Voltage dips,
short
interruptions and
voltage
variations on
power supply
input lines
EN 61000-4-11
Mains frequency
magnetic field
EN 61000-4-8
Mio-Sonic is intended for use in the electromagnetic environment specified
below. The customer or the user should assure that it is used in such an
environment.
Immunity EN 60601-
Test
Test level
Conducted
3 Veff from
RF
150kHz to
EN 61000-4-
80MHz
6
IACER Srl
1kV 1kV
differential differential
mode mode
< 5% U
T
(>95% dip in < 5% U
U ) (>95% dip in
T
For 0,5 cycles U
For 0,5 cycles
40% U
T
(60% dip in 40% U
U ) (60% dip in U
T
for 5 cycles for 5 cycles
70% U 70% U
T
(30% dip in (30% dip in U
U ) for 25 cycles
T
for 25 cycles
< 5% U
< 5% U (>95% dip in
T
(>95% dip in U
U ) for 5 seconds
T
for 5 seconds
3 A/m 3 A/m
r.f. Electromagnetic immunity
Compliance
1-2 Level
3 Veff from
150kHz to
80MHz
22 di 24
Mains
should be that of a
typical commercial or
hospital environment.
Mains
should be that of a
T
typical commercial or
) hospital environment.
T
If
continued
during
T
) interruptions,
T
recommended that the
device be powered from
an uninterruptible power
T
) supply or a battery.
T
T
)
T
Mains
magnetic field should be
that
commercial or hospital
environment.
Electromagnetic environment
Portable
communications
should be used no closer to any
part oft he device, including
MNPG73 Rev. 03 del 12/09/16
power quality
power quality
the user requires
operation
power mains
it
frequency
of a typical
– guidance
and mobile
equipment
is
RF