Ghibli & Wirbel Power Indust AX60 Z22 Utilisation Et Entretien page 61


Remove from underneath the vacuum cleaner the pin (A) and spring pin (B) that fasten the filter to the
shaking lever.

Remove the filter with its complete support.

Loosen the clamp and remove the support ring with seal.

Remove the knots and take out the pocket filter. Fit the new filter and put everything back in place,
locking the cap.
Caution!
All the material trapped by the filter and the filter itself must be disposed of through authorised channels
in the country where the vacuum cleaner is used.
All manuals and user guides at all-guides.com
A
ENGLISH - 28 -
B