Pioneer X-NM1 Mode D'emploi page 32

8
STANDBY SLEEP/
/ON TIMER
FM / AM
7
ENTER
32
En
All manuals and user guides at all-guides.com
Using the timer
Using the record timer
You can set the timer to record
something from the tuner at a time
when you may not be around. For
example, you might want to record a
program on the radio that is broadcast
while you're at work. During the actual
recording, the volume is automatically
set to minimum until you change it
again. Once the recording is finished,
the timer is switched off, and has to be
reset if you plan to record another
broadcast while you're out.
1 Prepare the tape deck for
recording.
• load a tape
• check the recording direction
• set the reverse mode (p. 17)
2 Set up the tuner.
Switch to the tuner, and tune into the
station (see page 15 for more detailed
instructions on this).
3 Press TIMER (SLEEP/TIMER)
repeatedly until you see
WAKE UP/REC (TIMER SET
UP?) then press ENTER.
WAKE UP / REC
TIMER SET UP ?
4 Use ∞ and 5 to select REC
TIMER then press ENTER.
REC. TIMER
Use the 5 and ∞ buttons to change
the currently displayed option in the
to select. Press 7
menu. Press
ENTER
anytime to cancel and exit the menu.
5 Set the recording start time:
First, set the hour:
Use — . 4 and ¢ . + (or ∞
and 5) to change the flashing hour
display, then press
ENTER
ON AM
Next, set the minute:
Use — . 4 and ¢ . + (or ∞
and 5) to change the flashing minute
display, then press
ENTER
ON AM
6 Set the recording end time:
First, set the hour:
Use — . 4 and ¢ . + (or ∞
and 5) to change the flashing hour
display, then press
ENTER
OFF AM
Next, set the minute:
Use — . 4 and ¢ . + (or ∞
and 5) to change the flashing minute
display, then press
ENTER
OFF AM
After pressing , the display shows
ENTER
you the settings you've just made,
including the switch on and off times
and the station frequency.
.
7:OO
.
7:3O
.
8:OO
.
8:15