Publicité
Les langues disponibles
Les langues disponibles
STANDBY
/ON
DISPLAY
All manuals and user guides at all-guides.com
Getting Started
Switching on and setting
the clock
This system has a built-in clock, which
needs to be set to be able to use the
timer features.
The clock can't be set when the
demonstration mode is active. See page
34 to cancel the demo mode.
1 Press STANDBY/ON to
switch the system to standby.
2 Press and hold the MENU/
CLOCK button (front panel
only) for about two seconds.
AM
12:OO
3 Use ∞ and 5 to set the hour,
then press ENTER.
AM
2:OO
4 Use ∞ and 5 to set the
minute, then press ENTER.
AM
2:4O
After pressing
, the display shows
ENTER
the new time briefly, then returns to
standby.
AM
2:4O
• When the system is on, press and
hold
(about three seconds)
DISPLAY
anytime to see the clock. In standby,
pressing
will switch on the
DISPLAY
display backlight and briefly show the
current time.
If the AC power is cut (blackout,
accidentally unplugging the power
cord), the system will return to the
12:00 display and you will have to set it
again to show the proper time.
Changing the clock
format
You can choose either a 12 or 24 hour
format for the clock. The default is 12
hour display.
1 Switch the system into
standby.
2 Press and hold DISPLAY for
about 3 seconds.
The format is changed and the new
clock format is shown in the display.
Automatic power on
buttons
There are a number of buttons other
than
/
which will switch
STANDBY
ON
the unit on.
•
,
,
, and
CD
LINE
TAPE
switch the unit on directly in to that
function. (In the case of
, if there is a disc/tape loaded it
TAPE
will start playing.)
0 on the front panel switches
•
CD
the unit on and opens the disc cover.
4
/
FM
AM
and
CD
13
En
Publicité
