Pioneer X-NM1 Mode D'emploi page 25

All manuals and user guides at all-guides.com
More tuner features
Displaying RDS
information
When the tuner is receiving on the FM
band, the RDS displays become
available.
1 Press DISPLAY repeatedly to
select an RDS display.
Choose between:
•
DISPLAY
•
FM / AM
•
2 Stop on the one you want
and after a few seconds the
RDS information will appear.
• The RDS indicator ( )will light in
the RDS mode.
• If no RDS signal can be received,
NO DATA
•Radio Text data longer than 16
characters scrolls across the display. If
there is noise during the RT scroll
display, some characters may be
temporarily displayed incorrectly.
• If there is no Program Type data
being broadcast, the display reverts to
Program Service name.
– Radio Text
RT
– Program Service name
PS
– Program Type
PTY
NEWS
is displayed.
Searching for a program
type
You can search for a station that is
broadcasting any program type from
the list on the previous page.
1 Press FM/AM to select FM.
Press repeatedly to switch between FM
and AM bands.
2 Press DISPLAY repeatedly
until PTY SEARCH appears in
the display.
PTY SEARCH
3 Press ENTER.
4 Use 5 and ∞ to choose a
program type, then press
ENTER.
AFFAIRS
You can search for any of the program
types listed on the previous page.
After pressing , the system starts
ENTER
searching through the station presets
for a match. When it finds one, the
search stops and the station plays for 5
seconds.
The display shows the preset station
number, the frequency, then the
program type.
5 If you want to keep listening
to the station, press ENTER
within the 5 seconds.
If you don't press
ENTER
resumes. Press 7 at any time to stop
the search.
6
, searching
25
En